You will receive (1) 9x9 or 12x12 or 12x18 Puff HTV Sheet ( design will not be cut Out) and (1) Reusable Transfer Sheet for every 3 Transfers
******Puff effect from the PRINTABLE Puff is less than the regular Puff vinyl, colors also go more Vintage and not bright after it’s pressed ,
Puff vinyl is a very unique Its reaction is similar as if you stretched a ballon and the color will lighten*****.
- Cut on Pattern Side and DO NOT MIRROR.
- After weeding excess vinyl, apply INCLUDED Mask to transfer design off of the backing and place on your garment face up.
- Use a squeegee to avoid air bubbles forming when applying the Transfer Tape to the vinyl. Bubbles within transfer tape will result in bubbles forming in the vinyl when it's applied to the substrate.
Manufactures Application Instructions
Application Instructions
270°F~275°F (132°C~135°C)
5~8 Seconds
Peel mask warm
Medium-Heavy, even pressure
- PrePress fabric to remove moisture
- Place the design onto the fabric of choice
- Cover the design with a Teflon sheet prior to heat press
- Press at medium pressure
- Remove the protective carrier at Hot Peel
1. Optimal temperature range may vary depending on your heat press. Testing prior to application is strongly recommended.
2. Puff effect from the PRINTABLE Puff is less than the regular Puff vinyl.
100% cotton, 100% uncoated polyester, poly/cotton blends
- Wash warm water
- Inside out wash